Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 43
Relay recording, PRIORITY MODE, REC/PB4K
![]() |
View all Panasonic AG-MDC20GJ / AG-MDR25PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
≥ (Maximum recordable scenes of a single SD card) PRIORITY MODE REC/PB(4K) REC/PB Recordable clips Approx. 89100 Approx. 3900 Different dates (l 89) Approx. 900 Approx. 900 ≥ The maximum number of recordable clips and the maximum number of different dates will be smaller than the table above when there are both MP4 clips and still pictures recorded on the SD card. ≥ Number of clips that can be recorded will be less than above in following case: j If you change [REC FORMAT] ≥ Please refer to page 255 about approximate recordable time. ≥ The recording control to this unit from the camera recorder can be performed when a camera recorder compatible to AUTO REC function is connected in SDI Mode. (l 82) ≥ Audio is not output from the built-in speaker during CAM Mode. ≥ It may take longer to stop recording when PRE-REC is used or [PRIORITY MODE] is set to [REC/PB(4K)]. ≥ The recording is stopped when the screen display is [REC] (flashing in red), so recording cannot be started even when the REC/PAUSE button is pressed. Press the REC/PAUSE button after the [REC] display is turned off. ∫ Relay recording This is simple Relay Recording. It is possible to continuously record on the SD card in the other card slot even when the available capacity of the SD card runs out during the recording. 1 Slot 1 2 Slot 2 3 Recording is started 4 Recording is paused A Recording B The card slot used for recording is switched automatically. C Replace the SD card with a recordable one. ≥ Even after switching of the recording media, you can replace the SD card that ran out of space with a new one and record the motion picture onto three or more SD cards. Since it may take a while for this unit to recognize a new SD card, replace the SD card that ran out of space when the SD card currently being used as a destination still has sufficient remaining recordable time. ≥ A message regarding the card remaining capacity is displayed after relay recording. Replace the SD card that has no remaining capacity. - 43 -
![](/manual_guide/products/panasonic-agmdc20gj-agmdr25pj-agmdr25-camera-recorder-operating-instructions-61315ec/43.png)