Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 94
External monitor, Set [OUTPUT SEL] to [HDMI], Set [RESOLUTION] to [DOWN CONV.]
![]() |
View all Panasonic AG-MDC20GJ / AG-MDR25PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
External monitor You can connect this unit to an external monitor as shown in the figure below. OUT HD SDI OUT A HDMI Cable (commercially-available) B BNC cable (commercially-available) C External monitor ≥ More detailed 4K video can be enjoyed by connecting this unit to a 4K video compatible external monitor with a HDMI cable, and playing back MP4 clip. For the external monitor not compatible to 4K video, playback with lower output resolution is possible by setting [RESOLUTION]. When connecting with an HDMI cable using an HDMI-to-DVI converter, etc., be sure to connect the HDMI cable to the connector of this unit last. Connecting the HDMI cable to the connector of this unit first may result in malfunction. ≥ The video signal of the SDI output may stop temporarily when the HDMI cable is disconnected and connected or the connected monitor is replaced, for example. ≥ This unit is not compatible with the VIERA Link. ≥ Use a commercially-available High Speed HDMI cable. If possible, we recommend using a cable with a length of 3 m (9.84 feet) or less. ≥ Use a commercially-available, double-shielded BNC cable equivalent to 5C-FB. ≥ If you connect this unit to the external monitor when this unit is set to Recording Mode, a squealing sound may be output. ∫ To watch images on an external monitor (4:3) or when both sides of the images do not appear on the screen Change the menu setting to display the images correctly. (Check the external monitor setting.) 1 Set [OUTPUT SEL] to [HDMI] OUTPUT SETUP] # [OUTPUT SEL] # [HDMI] 2 Set [RESOLUTION] to [DOWN CONV.] OUTPUT SETUP] # [RESOLUTION] # [DOWN CONV.] 3 Perform menu setup for [DOWN CONV.] OUTPUT SETUP] # [DOWN CONV.] # desired setting [SIDE CROP]: [LETTERBOX]: [SQUEEZE]: Outputs images so that they are fit to the height of the external monitor screen. Outputs images so that they are fit to the width of the external monitor screen. Outputs an image by compressing it in the horizontal direction to fit it in the screen. ≥ Down-conversion is not possible when outputting to SDI OUT terminal. - 94 -
![](/manual_guide/products/panasonic-agmdc20gj-agmdr25pj-agmdr25-camera-recorder-operating-instructions-61315ec/94.png)