Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 82
AUTO REC function, Set the AUTO REC output of this unit, Headphone Volume Adjustment, AUTO REC input
![]() |
View all Panasonic AG-MDC20GJ / AG-MDR25PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Headphone Volume Adjustment Adjust the volume of the headphone while recording. 1 Connect the headphone to the headphone output terminal. 2 Press the / buttons to adjust the volume. ≥ Actual volume to be recorded does not change. 3 Press the SET button to complete the setup. VOL 12 A [VOL] AUTO REC function Recording control of this unit from the SDI output device or recording control of the external device (such as recorder) from this unit can be performed with the AUTO REC signal. AUTO REC input This unit can automatically start/stop recording following the AUTO REC signal input from the camera recorder connected to the SDI IN terminal. ≥ For information about supported devices, refer to the support desk section of the website below. http://pro-av.panasonic.net/ Select the menu. RECORD SETUP] # [AUTO REC INPUT] # desired setting [OFF]: [TYPE1]: [TYPE2]: [TYPE3]: Does not start/stop recording automatically. Starts/stops recording automatically following the TYPE1 information added to HD-SDI. Starts/stops recording automatically following the TYPE2 information added to HD-SDI. Starts/stops recording automatically following the TYPE3 information added to HD-SDI. ≥ The input and recording may not match when the interval between start/stop times is small (1 second or less), or when the input signal is disrupted. ≥ To set to anything other than [OFF], always turn on this unit and connect to a camera recorder in the recording pause status. AUTO REC output Recording control of the external device (such as recorder) connected to the SDI OUT terminal can be performed by outputting the AUTO REC signal. ∫ Set the AUTO REC output of this unit Set [SDI REMOTE REC] to switch the setup of AUTO REC signal output from this unit. Select the menu. OUTPUT SETUP] # [SDI REMOTE REC] # desired setting [TYPE3]: [OFF]: TYPE3 AUTO REC signal can be output. AUTO REC signal is not output. - 82 -
![](/manual_guide/products/panasonic-agmdc20gj-agmdr25pj-agmdr25-camera-recorder-operating-instructions-61315ec/82.png)