Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 172
NTP server address, NTP port, Time adjustment interval, Auto port forwarding, Factory settings
![]() |
View all Panasonic AG-MDC20GJ / AG-MDR25PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
NTP server address When [Manual] is selected in the [NTP server address setting], input the IP address or host name of the NTP server. Maximum number of characters 0 to 128 half-size characters Characters that can be entered Half-size alphanumeric characters, half-size symbols : . _ - Factory settings: blank ≥ To input the [NTP server address] host name, the [DNS] setting must be selected on the [Network] tab of the network setup screen [Network] (l 168). NTP port Input the port No. of the NTP server. Port Nos. that can be selected: 1 to 65535 The following port numbers are used by the unit so they cannot be used. 20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 161, 162, 443, 554, 995, 10669, 10670, 59000 to 61000 Factory settings: 123 Time adjustment interval Selects the interval (1 to 24 hours in 1-hour increments) for acquiring the time from the NTP server. Factory range: 1h to 24h Factory settings: 1h ¥ UPnP This unit supports UPnP (Universal Plug and Play). Using the UPnP function allows the following to be set automatically. This item's setting is reflected when the [Set] button is pressed. ≥ Sets the router's port forwarding function. (However, a UPnP-compatible router is necessary.) This setting is useful when accessing the Camera Head or the unit from the internet or a mobile terminal. Auto port forwarding Whether to use the router's port forwarding function is set by selecting "On" or "Off". To use the automatic port forwarding function, the used router must support UPnP and the UPnP function must be enabled. Factory settings: Off ≥ The port number may be changed by automatic port forwarding. If the number is changed, the port No. of the Camera Head or the unit registered to the PC or the unit must be changed. ≥ To confirm that automatic port forwarding is correctly set, click the [Status] tab in the maintenance screen [Maintenance] to confirm that the [UPnP] status is set to [Enable]. (l 186) If [Enable] is not displayed, refer to "No access is possible from the web browser" in the "Troubleshooting" (l 247). - 172 -
![](/manual_guide/products/panasonic-agmdc20gj-agmdr25pj-agmdr25-camera-recorder-operating-instructions-61315ec/172.png)