Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 191

Network connection Remote operation by a mobile terminal It is possible to distribute the streaming image of this unit (IP image transfer) or change the setup of this unit (IP control) with the web screen of the mobile terminal by connecting this unit and a mobile terminal to a network via a wireless access point that is connected to this unit. Connect to this unit from the mobile terminal and display the image of this unit (JPEG format only). The image will be automatically updated to the most current state. Operations such as zoom, focus, or white balance can also be performed from the mobile terminal. Refer to page 125 for supported models. ≥ Images are displayed only in the JPEG format when using the mobile terminal. ≥ When the authentication dialog box is displayed, input the user name and password. The default settings for the user name and password are as follows. User name admin Password 12345 ≥ If the mobile terminal does not support the character code UTF-8, the characters cannot be displayed properly. 1 Input "http://IP address/mobile/ " using the mobile terminal, and press the enter button. ≥ The unit's images will now be displayed. Iris When this button is pressed, the buttons for performing the iris operations are displayed on the screen. This switches the iris between auto and manual. At the auto setting, the button label is green. This adjusts the iris in the "close" direction. It does not work during automatic adjustments. This adjusts the iris in the "open" direction. It does not work during automatic adjustments. Zoom The unit's zooming operations are performed using these buttons. Use this to adjust the zoom (magnification) to 1.0k. Use this to adjust the zoom (magnification) in the Wide direction. Use this to adjust the zoom (magnification) in the Tele direction. - 191 -