Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 169
Bandwidth control bitrate, Easy IP Setup accommodate period, RTSP port, Setting value
View all Panasonic AG-MDC20GJ / AG-MDR25PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Bandwidth control (bitrate) Select the amount of data to be distributed. Setting value: Unlimited, 1024kbps, 2048kbps, 4096kbps, 8192kbps, 16384kbps, 32768kbps Factory settings: Unlimited Easy IP Setup accommodate period Select [20min] or [Unlimited] as the time for enabling the operation of the network settings from the Easy IP Setup Software. Setting value: 20min The setting operations from the Easy IP Setup Software are enabled for 20 minutes after the camera has started operating. Unlimited The setting operations from the Easy IP Setup Software are enabled at all times. Factory settings: 20min RTSP port Assign a TCP communication port number used for RTSP initial negotiation. Factory range: 1 to 65535 The following port numbers are used by the unit so they cannot be used. 20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670, 59000 to 61000 Factory settings: 554 ≥ The unit also supports general RTSP protocols. Listed below are the URLs for RTSP requests. Request URL Description rtsp:///mediainput/h264/stream_1 Images set with [H.264(1)] (l 150) can be requested. rtsp:///mediainput/h264/stream_2 Images set with [H.264(2)] (l 150) can be requested. ≥ The following RTSP methods are supported.* j OPTIONS j DESCRIBE j SETUP j PLAY j PAUSE j GET_PARAMETER j TEARDOWN * SET_PARAMETER is not supported. An error will be returned. - 169 -