Sanyo 26KHS72R Installation Instructions - Page 30
Before Installing the Ceiling Panel
![]() |
View all Sanyo 26KHS72R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
07-115 SSHP_II 5/7/07 3:59 PM Page 30 I Ceiling Panel Never touch or attempt to CAUTION move the air direction louver by hand or you may damage X the unit. Instead, use the remote control unit if you want to change the direction or air flow. 3-6. Before Installing the Ceiling Panel (1) Remove the air-intake grille and air filter from the ceiling panel. (Figs. 3-13 and 3-14) (a) Remove the 2 screws on the latch of the airintake grille. (Fig. 3-13) (b) Press on the 2 latches of the air-intake grille with your thumbs in the direction of the arrow to open the grille. (Fig. 3-13) (c) With the air-intake grille open about 45°, remove the safety cord (hook on the grille side). (Fig. 3-14) (d) Pull the air-intake grille towards you to remove it from the ceiling panel. (2) Pull down the two panel catches on the body of the indoor unit body. (Fig. 3-15) Ceiling panel Panel catch Electrical component box Electrical component box Clamp Ceiling panel wiring connector Latch Screw Air-intake grille Safety cord Ceiling panel Fig. 3-13 Air filter 45° Unit body Fig. 3-14 Panel catch (arrange facing downwards) (2 locations) Screws M5 with washer (supplied) Air filter Fig. 3-15 30 Air-intake grille
![](/manual_guide/products/sanyo-26khs72r-installation-instructions-5d29d01/30.png)