Sanyo 26KHS72R Installation Instructions - Page 94
How to check for overla, of central addre
View all Sanyo 26KHS72R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
07-115 SSHP_II 5/7/07 4:00 PM Page 94 How to check for overlapping of central address Nos. (1) Press the and buttons at the same time for more than 4 seconds. and CODE No. C1 will flash. (2) Select CODE No. C3 by pressing , ( ) button and press the button. C3 changes from flashing to ON state and will flash. Then auto overlap checking will start. (3) If C3 changes from ON to flashing and stops flashing and disappears, there is no overlapping. Then finally, complete the auto overlap checking mode by pressing the button. (4) If some of GROUP No., ZONE No. and UNIT No. flash, you should try the zone registration again. 1 Select CODE No. C1 by pressing , ( ) button and press the button. 2 Select the flashing GROUP No. with the ZONE and GROUP buttons. Then press the button and reselect the ZONE, GROUP and UNIT No. 3 Then finally, complete the auto overlap checking mode by pressing the button. Fig. 8-11 SC 94