Sanyo 26KHS72R Installation Instructions - Page 60
How To Install The Wired Remote Controller, Optional Part
![]() |
View all Sanyo 26KHS72R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
07-115 SSHP_II 5/7/07 4:00 PM Page 60 6. HOW TO INSTALL THE WIRED REMOTE CONTROLLER (OPTIONAL PART) 6-1. Installation Site Selection G Install the remote controller at a height of between 3-5 ft. above the floor. G Do not install the remote controller in a place where it will be exposed to direct sunlight or near a window or other place where it will be exposed to the outside air. G Be sure to install the remote controller vertically, such as on a wall. G The mounting position for the remote controller should be located in an accessible place for control. G Never cover the remote controller or recess it into the wall. Drainage Work G When mounting the remote controller on a wall, refer to Figs. 6-1 and 6-2. 3-21/32 in. or more (from wall) Spacer 4-29/32 in. or more (when continuous installation) 3-17/32 in. or more 4-29/32 in. or more Wall (from wall) (when continuous installation) Hole for routing remote control cable JIS C8340 1 switchbox (no cover) Spacer Fig. 6-1 RC (WD) Wall 3-17/32 in. or more (from wall) 4-29/32 in. or more (when continuous installation) Hole for routing remote control cable JIS CB8340 2 switchboxes (no cover) Fig. 6-2 60
![](/manual_guide/products/sanyo-26khs72r-installation-instructions-5d29d01/60.png)