Sanyo 26KHS72R Installation Instructions - Page 39

07-115 SSHP_II 5/7/07 3:59 PM Page 39 3-13. Remove the Grille to Install the Indoor Unit KH(S)2672R Basically, these models can be installed and wired without removing the grille. If access to any internal part is needed, follow the steps given below: How to remove the grille (1) Set the 2 flaps in the horizontal position. (2) Unscrew the 3 screws. (Fig. 3-40a) (3) Remove the grille. (a) Hold both corners of the air intake grille, then pull out and up to open. (Fig. 3-40b) (b) Use a standard screwdriver to push up the 3 tabs to remove the grille. (Fig. 3-40b) (c) Pull the lower part of the grille toward you to remove. (Fig. 3-40a) How to replace the grille (1) Close the flaps. (2) Reinstall the grille into the lower part while aligning its tabs on the upper part. (Fig. 3-41a) Insert the tabs in the slots and push the lower part of the grille back into position. (3) Press at each of the 5 tabs to completely close the grille. Make sure that the grille and frame are firmly fitted together. (Fig. 3-41b) Air-intake grille Grille K Fig. 3-40a Air-intake grille Fig. 3-40b Fig. 3-41a Fig. 3-41b 39