Sanyo 26KHS72R Installation Instructions - Page 88
Weekly timer in, witche, Auxiliary, witch
View all Sanyo 26KHS72R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
07-115 SSHP_II 5/7/07 4:00 PM Page 88 SW2 Weekly timer input switches System controller operation can be set when weekly timer activates (ON/OFF). Switch No. System controller operation 123 Timer OFF→ON Timer ON→OFF 1 All ON All OFF OFF OFF OFF 2 No change All OFF ON OFF OFF Individual control All indoor units to 3 of all indoor units be 1*1 OFF ON OFF to be permitted All OFF and all 4 Same as above indoor units to be ON ON OFF 1*1 All indoor units to 5 Same as above be 2*2 OFF OFF ON All OFF and all 6 Same as above indoor units to be ON OFF ON 2*2 In case of Remote control mode, use 1 or 2 . In case of ZONE 1, 2, 3, 4 mode, ALL, all indoor units means one of ZONE 1, 2, 3, 4. *1: 1 (Central control 1) means ON/OFF operation cannot be executed by remote controller. *2: 2 (Central control 2) means ON/OFF, MODE change. Temp. setting cannot be executed by remote controller. Auxiliary switch Must be set to OFF position. Beep tone switch OFF: Beep tone when each button is pushed. ON: No tone when each button is pushed. Indication switch Normally set to OFF position. When set to ON position, indication is not displayed on LCD of system controller. SC *All switches are in OFF position at shipment. SW2 ON 12345678 OFF 88