Sony HDWS280 Product Manual (Operation Manual 1st Edition (Revised 5)) - Page 32
Function Menu Item List
View all Sony HDWS280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Chapter 3 Preparations 3-7-2 Function Menu Item List HOME page Item CHARACTR PB/EE CONFI CTL/TC ASSEMBLE TCG SET Setting Specifies whether or not to superimpose timecodes, menu settings, error messages, and so on over the video signals output to the HD SDI OUTPUT (SUPER) connectors, SDI OUT 2 (SUPER) connector, and COMPOSITE OUT 2 (SUPER) connector. ON: Superimpose. OFF: Do not superimpose. Selects the video and audio signals output during fast forward, rewind, stop, and standby. PB: Playback signals EE: E-E mode signals Selects whether or not to use the confidential playback function when recording. ENABLE: Use the confidential playback function. DISABLE: Do not use the confidential playback function. Selects the time data to display in time data display area. TC:Playback timecode read by the internal timecode reader or recording timecode. The LTC or VITC time data type indicator is lit. a) UB:User bits data of playback timecodes or recording timecode. The LUB or VIUB time data type indicator lights, depending on whether the timecode is LTC or VITC.a) CTL:The running time of the tape being played back or recorded, as calculated from a count of CTL signals recorded on the tape. The time is displayed in Hours:Minutes:Seconds:Frames format. Sets assemble edit mode. ON: The assemble edit mode is set, and ASMBL appears in the display window. OFF: The assemble edit mode is canceled. When CTL/TC is set to TC, a screen for setting the initial value of the timecode generated by the internal timecode generator appears.b) When CTL/TC is set to UB, a screen for setting the user bit of the timecode appears.b) Item Submenu T/t -/+ SET EXIT Setting Selects the digit to set data. Sets the value. Stores the set timecode. Terminates the operation, abandoning any settings not registered. a) The selection of LTC and VITC depends on the setting for TCR on the P4 TC page. b) Not displayed when TCG is not set to INT and PRST/RGN is not set to PRESET on the P4 TC page. P1 PROCS page Item Setting VID.PROC Selects the control method for the internal digital video processor. LOCAL: Change the settings of the internal digital video processor by using the function menu. MENU: Change the settings of the internal digital video processor, using the setup menu. Note When controlling the unit with the HKDV-900, set to MENU. VIDEO Sets the HD/SD video signal output level (−∞ to +3 dB). PRESET: Regardless of manually set values, the video signal is set to the standard level. Manual setting: With the displayed setting flashing, you can adjust the video signal output level by rotating the MULTI CONTROL knob. CHROMA Sets the HD/SD chroma signal output level (−∞ to +3 dB). PRESET: Regardless of manually set values, the chroma signal is set to the standard level. Manual setting: With the displayed setting flashing, you can adjust the chroma signal output level by rotating the MULTI CONTROL knob. HUE/ Sets the color phase of the HD/SD output CHRM PHS signal. PRESET: Regardless of manually set values, the color phase is set to the standard value. Manual setting: With the displayed setting flashing, you can adjust the value across the range ±30° by rotating the MULTI CONTROL knob. 32 Basic Operations of the Function Menu