Sony HDWS280 Product Manual (Operation Manual 1st Edition (Revised 5)) - Page 43
Playback - hdw s280 hdcam recorder
View all Sony HDWS280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 4 Recording and Playback 4-4 Playback This section describes playback of tapes. Note When two HDW-S280 units are connected, press the REMOTE buttons on both VTRs so that they are not lit. 4-4-1 Preparations for Playback Perform the following procedure. 1 Connect a cable to the video/audio signal input connectors of external equipment as necessary. 2 Select the audio output signals with MONITR L and MONITR R on the P3 AUDIO page of the function menu. For details on the function menu, see "3-7 Basic Operations of the Function Menu" on page 31. 3 Select the time data with CTL/TC on the HOME page of the function menu. If CTL is selected You can reset the CTL to 0:00:00:00 by pressing the RESET button. If TC/U-BIT is selected You can select type of timecode (VITC/LTC/AUTO) with TCR on the P4 TC page of the function menu. 4 Select the convert mode on the setup menu depending on the format of the cassette to be played. To play an HDCAM cassette Select the down-convert mode with setup menu item 930. For details on setup menu item 930, see page 77. To play a Betacam SX or analog Betacam cassette Select the up-convert mode with setup menu item 950. For details on setup menu item 950, see page 78. To output timecodes synchronized with the output video signal The playback timecode or the timecode read by the timecode reader can be output via the TIME CODE OUT connector. To synchronize the timecode with the output video signal, follow the procedures below. 1 Set setup menu item 606 to REGEN. For details on setup menu item 606, see page 70. 2 Set TCG on the P4 TC page of the function menu to INT. 3 Set PRST/RGN on the P4 TC page of the function menu to LTC or VITC. For details on the function menu, see "3-7 Basic Operations of the Function Menu" on page 31. 4-4-2 Playback Operation 1 HDW-S280 EJECT PB LEVEL 13 REC LEVEL 13 24 24 R/P LEVEL CTL VAR LEVEL PRESET PHONES REC INHI ON OFF KEY INHI ON OFF SHIFT PAGE HOME CHARACTR ON PB/EE PB CONFI ENABLE CTL/TC TC EMPH EMPH EMPH EMPH 0 0 -10 -10 -20 -20 -30 -30 -40 -40 1 23 4 HD INPUT : ANA CH1 IN : -60 CH2 IN : -4 COND OUT : +4 MONI L : 1 BANK 2 MONI R : 2 D-STOP DOLBY NR P ROLL ASSEMBLE 59.94i SDI ASMBL CONFI ON RECORDER OFF LTC DF VITC LTC EXT-LTC R-RUN REM:00M TCG SET HOME 00:00:00:00. DISPLAY MULTI CONTROL REMOTE MENU RESET PREROLL PUSH PITCH CTL JOG/SHUTTLE REW PLAY F FWD STOP REC PAUSE STANDBY 23 1 Insert a cassette to be played. 2 Press the PLAY button. Playback begins. 3 Press the STOP button to stop playback. To adjust the headphone audio level Rotate the LEVEL adjustment knob. To adjust the audio playback level Set the R/P LEVEL CTL switch to VAR and rotate the PB LEVEL adjustment knobs. You can select the channels to be adjusted with setup menu item 826. For details on setup menu item 826, see page 76. 43 Playback