Sony HDWS280 Product Manual (Operation Manual 1st Edition (Revised 5)) - Page 88
Processor adjustment range, Input connectors, Output connectors, Remote connectors, Memory stick
View all Sony HDWS280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Appendixes Audio Metal tape Oxide tape LNG Frequency response (10 dB below standard level (+4 dBm)) 50 Hz to 15 kHz +1.5 dB/ −3.0 dB 50 Hz to 15 kHz ±3.0 dB S/N ratio (at 3% 525 72 dB or distortion level) more 50 dB or more (Dolby NR OFF) 625 68 dB or more 62 dB or more Distortion (1 kHz, reference level (+4 dBm)) 1.5% or less 2% or less Wow and flutter 0.2% rms or 0.2% rms or less less Note The AFM function is not supported. Processor adjustment range Video level Chroma level Setup level Chroma phase System phase ±3 dB/−∞ to +3 dB selectable ±3 dB/−∞ to +3 dB selectable ±30 IRE ±30° Sync: ±15 ms SC: ±200 ns Input connectors HD SDI INPUT (IN/MONI) BNC (1 each for input and for through output to a monitor) Serial digital (1.485 Gbits/s) SMPTE 292M REF. INPUT BNC (2 in loop through connection) HD Three-valued (positive and negative) sync signal 0.6 Vp-p, 75 Ω, sync negative SD Black burst or composite sync NTSC: 0.286 Vp-p, 75 Ω, sync negative PAL: 0.3 Vp-p, 75 Ω, sync negative AUDIO INPUT (1/2) XLR 3-pin, female (2) high-impedance, balanced The input level is set with setup menu item 834 TIME CODE IN BNC Output connectors HD SDI OUTPUT (1/2) BNC (2 for character superimposition) Serial digital (1.485 Gbits/s) SMPTE 292M COMPOSITE OUT (1/2) BNC (2 including 1 for character superimposition) 1.0 Vp-p, 75 Ω, sync negative SDI OUT (1/2) BNC (2 including 1 for character superimpositon) Serial digital (270 Mbits/s) SMPTE 259 M AUDIO OUTPUT (1/2) XLR 3-pin, male (2) +4 dBm at 600 Ω load, low impedance, balanced AUDIO MONITOR OUTPUT (L/R) XLR 3-pin, male (2) +4 dBm at 600 Ω load, low impedance, balanced TIME CODE OUT BNC 1.0 Vp-p, 75 Ω PHONES JM-60 stereo phone jack −∞ to −12 dBu at 8 Ω load, unbalanced REMOTE 4-pin, female AC input: 15 V DC, max 5 W DC input: 10.5 to 17 V DC, max 5 W (with the optional BVR-3 or RM-280 connected) Remote connectors REMOTE 9P D-sub 9-pin, female VIDEO CONTROL D-sub 9-pin, female (for optional HKDV900) Memory stick slot Memory stick (8 to 128 MB) Accessories supplied Operation Manual Japanese version (1) English version (1) CD-ROM manual (1) Installation Manual (1) Optional accessories RCC-5G 9-pin Remote Control Cable HKDV-900 Video Remote Control Unit BCT-HD12CL Cleaning Cassette Tape BKP-L551 Battery Adaptor BP-GL95/GL65/L60S/L80S Battery Pack 88 Specifications