Sony HDWS280 Product Manual (Operation Manual 1st Edition (Revised 5)) - Page 87

Appendixes Digital audio system Digital audio (CH1 to CH4) signal format Sampling frequency 48 kHz (synchronized with video) Quantization 20 bits/sample Wow and flutter Below measurable level Headroom 20 dB (or 18 dB, 16 dB, 12 dB selectable) Emphasis T1= 50 μs, T2=15 μs (on/off selectable in recording mode) Analog input/output (CH1 to CH4) A/D, D/A quantization 20 bits/sample Frequency response 20 Hz to 20 kHz +0.5 dB/ −1.0 dB (Standardize at 1 kHz) Dynamic range 90 dB or more (at 1 kHz, emphasis on) Distortion 0.08% or less (at 1 kHz, emphasis on, reference level (+4 dBm)) Crosstalk −80 dB or less (at 1 kHz, between any two channels) Analog audio (CUE) Frequency response 100 Hz to 10 kHz, ±3 dB S/N ratio 45 dB or more (at 3% distortion level) Distortion 2% or less (THD, 1 kHz, reference level) Wow and flutter 0.3% rms or less Betacam SX playback Analog composite output Bandwidth 0.5 to 5.75 MHz +0.5 dB/−2.0 dB S/N ratio 53 dB or more K factor (2T pulse) 1% or less Differential gain 2% or less Differential phase 2° or less Y/C delay 20 ns or less Digital Audio (CH1 to CH4) Frequency response 20 Hz to 20 kHz +0.5 dB/ −1.0 dB (Standardize at 1 kHz) Dynamic range HDCAM 90 dB or more (at 1 kHz, emphasis on) SX 88 dB or more (at 1 kHz, emphasis on) Distortion 0.08% or less (at 1 kHz, emphasis on, reference level (+4 dBm)) Analog Betacam playback Video (525) Metal tape Oxide tape Band- Y width 30 Hz to 30 Hz to 4.5 MHz 4.1 MHz +0.5 dB/−4.0 dB +0.5 dB/−6.0 dB R-Y/B-Y 30 Hz to 30 Hz to 1.5 MHz 1.5 MHz +0.5 dB/−3.0 dB +0.5 dB/−3.0 dB S/N Y 51 dB or more 48 dB or more ratio R-Y/B-Y 48 dB or more 45 dB or more K factor (2T pulse) 2% or less 3% or less LF non- Y 3% or less linearity R-Y/B-Y 4% or less Y/C delay 20 ns or less Video (625) Metal tape Oxide tape Band- Y width 20 Hz to 25 Hz to 4.5 MHz 4.1 MHz +0.5 dB/−4.0 dB +0.5 dB/−6.0 dB R-Y/B-Y 25 Hz to 25 Hz to 1.5 MHz 1.5 MHz +0.5 dB/−3.0 dB +0.5 dB/−3.0 dB S/N Y 48 dB or more 46 dB or more ratio R-Y/B-Y 48 dB or more 45 dB or more K factor (2T pulse) 2.5% or less 4% or less LF non- Y 3% or less linearity R-Y/B-Y 4% or less Y/C delay 20 ns or less 87 Specifications