Sony STR-DN2010 Operating Instructions (Large File - 11.22 MB) - Page 112
from the speakers, When a test tone is output
UPC - 027242779938
View all Sony STR-DN2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
2 Press V/v repeatedly to adjust the parameter, then press . • OFF • AUTO The test tone is output from each speaker in sequence. • L, C, R, SR, SB*, SBR, SBL, SL, LH, RH, SW You can select which speakers will output the test tone. * "SB" appears when only one surround back speaker is connected. 3 Press V/v repeatedly to adjust the speaker level, then press . To output test tone from adjacent speakers You can output test tone from adjacent speakers so that you can adjust the balance between the speakers. 1 Press B/b repeatedly to select "Phase Noise", then press . 2 Press V/v repeatedly to adjust the parameter, then press . • OFF • L/C, C/R, R/SL, R/SR, SR/SL, SR/SBR, SR/SB*, SBR/SBL, SB/SL*, SBL/SL, SL/L, L/SR, L/RH, LH/RH, LH/R Lets you output the test tone sequentially from adjacent speakers. Some items may not be displayed, depending on the setting of the speaker pattern. * "SR/SB" and "SB/SL" appear when only one surround back speaker is connected. 3 Press V/v repeatedly to adjust the speaker level, then press . To output the source sound from adjacent speakers You can output the source sound from adjacent speakers so that you can adjust the balance between the speakers. 1 Press B/b repeatedly to select "Phase Audio", then press . 2 Press V/v repeatedly to adjust the parameter, then press . • OFF • L/C, C/R, R/SL, R/SR, SR/SL, SR/SBR, SR/SB*, SBR/SBL, SB/SL*, SBL/SL, SL/L, L/SR, L/RH, LH/RH, LH/R Lets you output front 2 channel source sound (instead of the test tone) sequentially from adjacent speakers. Some items may not be displayed, depending on the setting of the speaker pattern. * "SR/SB" and "SB/SL" appear when only one surround back speaker is connected. 3 Press V/v repeatedly to adjust the speaker level, then press . When a test tone is not output from the speakers • The speaker cords may not be connected securely. Check to see if they are connected securely and cannot be disconnected by pulling on them slightly. • The speaker cords may have the short-circuit problem. When a test tone is output from a different speaker than the speaker displayed on the TV screen The speaker pattern to the connected speaker is not set up correctly. Make sure the speaker connection and the speaker pattern match. 112GB