Sony STR-DN2010 Operating Instructions (Large File - 11.22 MB) - Page 116

Video Settings menu You can make settings for video. Resolution (Converting video signals) Lets you convert the resolution of analog video input signals. "Resolution" parameter Input from Output from x Direct COMPONENT VIDEO IN jacks VIDEO IN jacks x Auto COMPONENT VIDEO IN (initial setting) jacks VIDEO IN jacks x 480i/576i COMPONENT VIDEO IN jacks VIDEO IN jacks x 480p/576p COMPONENT VIDEO IN jacks VIDEO IN jacks x 720p x 1080i COMPONENT VIDEO IN jacks VIDEO IN jacks x 1080p COMPONENT VIDEO IN jacks VIDEO IN jacks HDMI TV OUT jack - - za) zc) zc) z z z z z z COMPONENT MONITOR VIDEO VIDEO MONITOR OUT jack OUT jacks a - - a zb) zb) zb) zb) z z z z z - z a zd) - zd) a a - - a z : Video signals are converted and output through the video converter. a : The same type of signal as that of the input signal is output. Video signals are not converted. - : Video signals are not output. a)The resolution is set automatically, depending on the connected monitor. b)When the TV is connected to jacks other than the HDMI jacks, 480i/576i signals are output. c)480p/576p signals are output even if 480i/576i is set. d)Video signals without copyright protection are output based on the settings menu. Video signals with copyright protection are output as 480p/576p. Notes • Video signals are not output from the COMPONENT VIDEO MONITOR OUT or MONITOR VIDEO OUT jacks when the monitor, etc., is connected to HDMI TV OUT jack. • If you select a resolution that the connected TV does not support in the "Resolution" parameter, the images from the TV cannot be output correctly. • Converted HDMI image output does not support x.v.Color (x.v.Colour), Deep Color (Deep Colour) and 3D image. 116GB