Sony STR-DN2010 Operating Instructions (Large File - 11.22 MB) - Page 138
Input Assign in the Input Option menu, Test Tone in the Speaker Settings menu.
UPC - 027242779938
View all Sony STR-DN2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
There is no sound from digital sources (from COAXIAL or OPTICAL input jack). • Check that the INPUT MODE is not set to "ANALOG" (page 103). • Check that the "A. DIRECT" is not being used. • Check that the selected digital audio input jack is not assigned to other inputs in "Input Assign" in the Input Option menu (page 104). The left and right sounds are unbalanced or reversed. • Check that the speakers and components are connected correctly and securely. • Adjust the level parameters using the Speaker Settings menu. There is severe hum or noise. • Check that the speakers and components are connected securely. • Check that the connecting cords are away from a transformer or motor, and at least 10 feet (3 meters) away from a TV set or fluorescent light. • Move your audio components away from the TV. • The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol. There is no sound, or only a very lowlevel sound is heard from the center/ surround/surround back/front high speakers. • Select a Cinema Studio EX mode (page 73, 74). • Adjust the speaker level (page 110). • Make sure the center/surround speaker (s) is (are) set to either "Small" or "Large". • Check that the speaker settings are appropriate using the Auto Calibration menu or "Speaker Pattern" in the Speaker Settings menu. Then check that sound is output from each speaker correctly, using "Test Tone" in the Speaker Settings menu. There is no sound from the surround back speakers. • Some discs have no Dolby Digital Surround EX flag even though the packages have Dolby Digital Surround EX logos. • Check the "Speaker Pattern" setting (page 40). There is no sound from the subwoofer. • Check that the subwoofer is connected correctly and securely. • Make sure you have turned on your subwoofer. • Depending on the selected sound field, no sound output from the subwoofer. • When all speakers are set to "Large" and "Neo:6 CIN" or "Neo:6 MUS" is selected, there is no sound from the subwoofer. • Check the "Speaker Pattern" setting (page 40). The surround effect cannot be obtained. • Make sure you have selected the sound field for movie or music (page 73 or 74). • Sound fields do not function for signals with a sampling frequency of more than 48 kHz. Dolby Digital or DTS multi channel sound is not reproduced. • Check that the DVD, etc. you are playing is recorded in Dolby Digital or DTS format. • When connecting the DVD player, etc., to the digital input jacks of this receiver, make sure the setting for the digital audio output of the connected component is available. For example, when connecting the "PlayStation 3", set the BD/DVD audio output format to "Bitstream" on the "PlayStation 3". • Set "Audio Out" to "AMP" in the HDMI Settings menu. 138GB