Sony STR-DN2010 Operating Instructions (Large File - 11.22 MB) - Page 91

8 Set the Control for HDMI function of the connected component to on. If the Control for HDMI function for the connected component is already set to on, you do not need to change the setting. For details on setting the TV and connected components, refer to the operating instructions of the respective components. Notes • Before you do the "Control for HDMI-Easy Setting" from the TV, be sure to turn on the TV, connected components and receiver. • If the playback components cannot function after you have made the settings for "Control for HDMIEasy Setting", check the Control for HDMI setting on your TV. • If the connected components do not support "Control for HDMI-Easy Setting", you need to set the Control for HDMI function for the connected components to on before you perform the "Control for HDMI-Easy Setting" from the TV. • When you assign the component video input to the HDMI input using the Input Assign function, you cannot set "Control for HDMI" to "ON". Playing back components with one-touch operation (One-Touch Play) By a simple operation (one-touch), components connected to the receiver with HDMI connections start automatically. You can enjoy the sound/image using connected components. When you set "Pass Through" to "AUTO" or "ON", sound and image can be output only from the TV while the receiver remains in standby mode. When you start playback a connected component, the receiver and TV operation are simplified as follow: Receiver and TV Turns on (if in standby mode) Switches to appropriate HDMI input Notes • Depending on the TV, the start of the content may not be output. • Depending on the settings, the receiver may not turns on when "Pass Through" is set to "AUTO" or "ON". Tip You can also select a connected component, such as DVD/Blu-ray Disc player using the TV menu. The receiver and TV will automatically switch to the appropriate HDMI input. "BRAVIA" Sync Features 91GB