Sony STR-DN2010 Operating Instructions (Large File - 11.22 MB) - Page 119
External Control, Controllers, To set the Proxy server, manually
UPC - 027242779938
View all Sony STR-DN2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
4 Press V/v repeatedly to select the IP address, then press . The soft keyboard appears on the TV screen. 5 Press V/v/B/b and to select a character one by one to enter the IP address. 6 Press V/v/B/b to select "Finish", then press . 7 Press b to display the next screen. 8 Repeat the process in steps 4 to 7 again to enter the Subnet Mask, Gateway address, DNS1 address, and DNS2 address. 9 Press V/v repeatedly to select "Test Connection", then press . "Success! The receiver is now connected to network." appears on the TV screen. 10Press to select "Finish". To set the Proxy server manually 1 Press V/v repeatedly to select "Network Setup", then press . 2 Press V/v repeatedly to select "Proxy Setup", then press . 3 Press V/v repeatedly to select "Enable", then press . 4 Press . The soft keyboard appears on the TV screen. 5 Press V/v/B/b and to select a character one by one to enter the proxy server address. 6 Press V/v/B/b repeatedly to select "Finish", then press . 7 Press b to select the Port number box, then press . The soft keyboard appears on the TV screen. 8 Press V/v/B/b and to select a character one by one to enter the port number. 9 Press V/v/B/b repeatedly to select "Finish", then press . 10Press b. 11Press V/v repeatedly to select "Finish", then press . External Control Lets you turn the function which controls the receiver from external controllers on the home network on or off. x OFF x ON Note If you set "Controllers", set "External Control" to "ON". Controllers Lets you set availability of operations allowed for the receiver for network controllers on the home network that have attempted to access the receiver in the past. 1 Press V/v repeatedly to select "Controllers", then press . The setting screen used for Controllers appears on the TV screen. 2 Press V/v repeatedly to select the controller you want to allow to operate the receiver from the list, then press to check the box. When you check the box for "Auto Permission", all the controllers detected are checked automatically. 3 Press V/v/B/b repeatedly to select "Finish", then press . continued 119GB Adjusting Settings