Sony STR-DN2010 Operating Instructions (Large File - 11.22 MB) - Page 33
Function for conversion of video signals, Notes on converting video, signals, To connect a recording
UPC - 027242779938
View all Sony STR-DN2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Connections Function for conversion of video signals The receiver is equipped with a function for converting video signals. • Composite video signals can be output as HDMI video and component video signals • Component video signals can be output as HDMI video and video signals. OUTPUT jack HDMI TV OUT INPUT jack HDMI IN* a VIDEO IN a COMPONENT VIDEO IN a COMPONENT VIDEO MONITOR OUT - a a MONITOR VIDEO OUT - a a a : Video signals are output. - : Video signals are not output. * HDMI video signals cannot be converted to component video signals and video signals. As the initial setting, video signals input from the connected component are output as shown in the table above. We recommend that you set the video conversion function to match the resolution of the monitor you are using. For details, see "Video Settings menu" (page 116). Notes on converting video signals • When video signals from a VCR, etc., are converted on this receiver and then output to your TV, depending on the status of the video signal output, the image on the TV screen may appear distorted horizontally or no image may be output. • The converted video signals are not output from the VIDEO OUT jack. • When you play back a VCR with an image improvement circuit, such as TBC, the images may be distorted or may not be output. In this case, set the image improvement circuit function to off. • The resolution of the signals output to the COMPONENT VIDEO MONITOR OUT jacks is converted up to 1080i. The resolution of the signals output to the HDMI TV OUT jack is converted up to 1080p. • COMPONENT VIDEO MONITOR OUT jacks have restrictions on resolution when the resolution of video signals protected by copyright technology is converted. Resolution of up to 480p/576p can be output to the COMPONENT VIDEO MONITOR OUT jacks. The HDMI TV OUT jack has no restriction on resolution. • Video signals for which the resolution has been converted cannot be output from the COMPONENT VIDEO MONITOR OUT jacks or the HDMI TV OUT jack simultaneously. The video signals are output from the HDMI TV OUT jack when both are connected. • Set "Resolution" to "Auto" or "480i/576i" in the Video Settings menu to output the video signals from the MONITOR VIDEO OUT, COMPONENT VIDEO MONITOR OUT jacks when both are connected. • Converted HDMI image output does not support x.v.Color (x.v.Colour), Deep Color (Deep Colour) and 3D image. To connect a recording component When recording, connect the recording component to the VIDEO OUT jacks of the receiver. Connect cords for input and output signals to the same type of jack, as VIDEO OUT jacks do not have an up-conversion function. Note Signals output from the HDMI TV OUT or MONITOR OUT jacks may not be recorded properly. 33GB