Sony STR-DN2010 Operating Instructions (Large File - 11.22 MB) - Page 39
: Connecting the AC power cord (mains lead), Preparing the Receiver, Initializing the receiver - reset
![]() |
UPC - 027242779938
View all Sony STR-DN2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Preparing the Receiver 8: Connecting the AC power cord (mains lead) Connect the AC power cord (mains lead) to a wall outlet. Notes • Before connecting the AC power cord (mains lead), make sure that metallic wires of the speaker cords are not touching each other between the SPEAKERS terminals. • Connect the AC power cord (mains lead) firmly. AC power cord (mains lead) Preparing the Receiver Initializing the receiver Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their initial settings. Be sure to use the buttons on the receiver for this operation. ?/1 To the wall outlet MUSIC MUTING 1 Press ?/1 to turn off the receiver. 2 Hold down MUTING and MUSIC, then press ?/1 to turn on the receiver. 3 Release MUTING and MUSIC after a few seconds. After "CLEARING" appears on the display for a while, "CLEARED!" appears. All the settings you have changed or adjusted are reset to the initial settings. Note It takes about 30 seconds for the memory to be cleared completely. Do not turn the receiver off until "CLEARED!" appears on the display. continued 39GB
![](/manual_guide/products/sony-strdn2010-operating-instructions-large-file-1122-mb-5801808/39.png)