Sony STR-DN2010 Operating Instructions (Large File - 11.22 MB) - Page 117
HDMI Settings menu, Control for HDMI, Pass Through, Audio Out
![]() |
UPC - 027242779938
View all Sony STR-DN2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
HDMI Settings menu You can make the required settings for components connected to the HDMI jack. Control for HDMI Lets you turn the Control for HDMI function on or off. For details, see "Preparing for the "BRAVIA" Sync" (page 90). x ON x OFF Note When you set "Control for HDMI" to "ON", "Audio Out" may be changed automatically. Pass Through Lets you output the HDMI signals to the TV even when the receiver is in standby mode. x OFF The receiver does not output HDMI signals when the receiver is in the standby mode. Turn on the receiver to enjoy the connected component's source on the TV. This setting saves power in the standby mode compared with the "ON" setting. x AUTO When the TV is turned on while the receiver is in the standby mode, the receiver outputs HDMI signals from the receiver's HDMI TV OUT jack. Sony recommends this setting if you use a TV that is compatible with "BRAVIA" Sync. This setting saves power in the standby mode compared with the "ON" setting. x ON When the receiver is in the standby mode, the receiver continuously outputs HDMI signals from the receiver's HDMI TV OUT jack. Notes • This parameter is not available when "Control for HDMI" is set to "OFF". • When "AUTO" is selected, it may take a little more time for the image and sound to be output to the TV than when "ON" is selected. • When the receiver is in standby mode, "A. STANDBY" appears on the display if "Pass Through" is set to "AUTO" or "ON". However, "A. STANDBY" will disappear when "Pass Through" is set to "AUTO" and no signals are detected. Audio Out Lets you set the HDMI audio signals from the playback component connected to the receiver via an HDMI connection. x TV+AMP The sound is output from TV's speaker and the speakers connected to the receiver. Notes • The sound quality of the playback component depends on the TV's sound quality, such as the number of channels, and the sampling frequency, etc. When the TV has stereo speakers, the sound output from the receiver is also stereo as that of the TV, even if you play back multi channel source. • When you connect the receiver to an image display component (projector, etc.), sound may not be output from the receiver. In this case, select "AMP". • When you select the input that you have assigned the HDMI input, sound does not output from the TV. x AMP The HDMI audio signals from the playback component is only output to the speakers connected to the receiver. Multi channel sound can be played back as it is. Note Audio signals are not output from the TV's speaker when "Audio Out" is set to "AMP". Adjusting Settings 117GB
![](/manual_guide/products/sony-strdn2010-operating-instructions-large-file-1122-mb-5801808/117.png)