Sony STR-DN2010 Operating Instructions (Large File - 11.22 MB) - Page 120

To cancel the setup Press V/v repeatedly to select "Cancel", then press in step 3. To remove the detected controllers from the list 1 Press V/v repeatedly to select the controller you want to remove from the list, then press to check the box. 2 Press V/v repeatedly to select "Remove All", then press . Tip Up to 10 network controllers that have attempted to access the receiver are listed, and each of them can control the receiver. Device Name Lets you assign a device name to the receiver up to 20 characters displayed as being on the home network. To assign the device name 1 Press V/v repeatedly to select "Device Name", then press . 2 Press . The soft keyboard appears on the TV screen. 3 Press V/v/B/b and to select a character one by one to enter the device name. 4 Press V/v/B/b repeatedly to select "Finish", then press . When the setting is applied to the receiver, the receiver will restart automatically. Tip The default device name is "STR-DN2010". Rhapsody Account Lets you enter the Rhapsody Account to listen to the Rhapsody Internet radio service. For details, see "Setting an account" (page 83). Rhapsody is only available in the U.S. Network Standby Lets you turn the function that activates the switching hubs on the rear of the receiver and allows external control devices to control the receiver on or off even when the receiver is in standby mode. x OFF The network function turns off when the receiver is in standby mode. x ON The network function works even when the receiver is in standby mode. In addition, the start-up time of the network function is reduced after the receiver is turned on. Note When the receiver is in standby mode, "A. STANDBY" appears on the display if "Network Standby" is set to "ON". 120GB