TP-Link EAP245 EAP Controller V2.4.7 User Guide - Page 56
Auto Mail Feature, Server, Apply, Server and, Nvram
View all TP-Link EAP245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
click Apply to save the configurations. Three ways are available: Auto Mail Feature, Server and Nvram. ··Auto Mail Feature If Auto Mail Feature is enabled, system logs will be sent to a specified mailbox. Check the box to enable the feature and configure the parameters. From Address To Address SMTP Server Enable Authentication Time Mode Fixation Time Enter the sender's E-mail address. Enter the receiver's E-mail address. Enter the IP address of the SMTP server. You can check the box to enable mail server authentication. Enter the sender's mail account name and password. Select Time Mode. System logs can be sent at specific time or time interval. If you select Fixation Time, specify a fixed time to send the system log mails. For example, 08:30 indicates that the mail will be sent at 8:30 am everyday. Period Time If you select Period Time, specify a period time to regularly send the system log mail. For example, 6 indicates that the mail will be sent every six hours. ··Server If Server is enabled, system logs will be sent to a server. You can enable the feature and enter its IP address and port. 51