TP-Link EAP245 EAP Controller V2.4.7 User Guide - Page 64
IP Setting, Radio, Get a Dynamic IP Address From the DHCP Server
View all TP-Link EAP245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
IP Setting You can configure an IP address for this EAP. Two options are provided: DHCP and Static. ··Get a Dynamic IP Address From the DHCP Server 1. Configure your DHCP server. 2. Select DHCP on the page above. 3. Enable the Fallback IP feature. When the device cannot get a dynamic IP address, the fallback IP address will be used. 4. Set IP address, IP mask and gateway for the fallback address and click Apply. ··Manually Set a Static IP Address for the EAP 1. Select Static. 2. Set the IP address, IP mask and gateway for the static address and click Apply. Radio Radio settings directly control the behavior of the radio in the EAP device and its interaction with the physical medium; that is, how and what type of signal the EAP device emits. Select the frequency band (2.4GHz/5GHz) and configure the following parameters. 59