TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 117
dot1x port-control
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide dot1x port-control Description The dot1x port-control command is used to configure the Control Mode of IEEE 802.1X for the specified port. By default, the control mode is "auto". To restore to the default configuration, please use no dot1x port-control command. Syntax dot1x port-control {auto | authorized-force | unauthorized-force} no dot1x port-control Parameter auto | authorized-force | unauthorized-force -- The Control Mode for the port. auto: In this mode, the port will normally work only after passing the 802.1X Authentication. authorized-force: In this mode, the port can work normally without passing the 802.1X Authentication. unauthorized-force: In this mode, the port is forbidden working for its fixed unauthorized status. Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Configure the Control Mode for Gigabit Ethernet port 25 as "authorized-force": T2500-28TC(config)#interface gigabitEthernet 1/0/25 T2500-28TC(config-if)#dot1x port-control authorized-force dot1x port-method Description The dot1x port-method command is used to configure the control type of IEEE 802.1X for the specified port. By default, the control type is "mac-based". To restore to the default configuration, please use no dot1x port-method command. 100