TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 279
ipv6 mld snooping vlan immediate-leave, ipv6 mld snooping vlan mrouter
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 279 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide Example Specify the member port aging time as 100 seconds in VLAN 2: T2500-28TC(config)# ipv6 mld snooping vlan 2 member-aging-time 100 ipv6 mld snooping vlan immediate-leave Description The ipv6 mld snooping vlan immediate-leave command is used to enable the immediate leave function on a specified VLAN. To disable this funciton, please use no ipv6 mld snooping vlan immediate-leave command. By default, it is disabled. Syntax ipv6 mld snooping vlan vlan-id immediate-leave no ipv6 mld snooping vlan vlan-id immediate-leave Parameter vlan-id -- The specified IEEE 802.1Q VLAN ID to enable the immediate leave function, ranging from 1 to 4094. Command Mode Global Configuration Mode Example Enable immediate leave function on VLAN 2: T2500-28TC(config)# ipv6 mld snooping vlan 2 immediate-leave ipv6 mld snooping vlan mrouter Description The ipv6 mld snooping vlan mrouter command is used to configure the static router port in a specified VLAN. To disable the static router port, please use no mld snooping vlan mrouter command. Syntax ipv6 mld snooping vlan vlan-id mrouter interface gigabitEthernet port no ipv6 mld snooping vlan vlan-id mrouter [interface gigabitEthernet port] Parameter vlan-id --The specified IEEE 802.1Q VLAN ID, ranging from 1 to 4094. port -- Interface number of the router port(s). 262