TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 263
ip igmp snooping filter maxgroup, ip igmp snooping filter mode
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 263 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Enable IGMP Snooping filter function for Gigabit Ethernet port 26: T2500-28TC(config)#interface gigabitEthernet 1/0/26 T2500-28TC(config-if)#ip igmp snooping filter ip igmp snooping filter maxgroup Description The ip igmp snooping filter maxgroup command is used to specify the maximum number of multicast groups for a port to join in. Syntax ip igmp snooping filter maxgroup maxgroup Parameter maxgroup -- The maximum number of multicast groups for a port to join in. It is used to prevent some ports taking up too much bandwidth. Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Specify the maximum number of multicast groups for Fast Ethernet ports 2-5 to join in as 10: T2500-28TC(config)#interface range fastEthernet 1/0/2-5 T2500-28TC(config-if-range)#ip igmp snooping filter maxgroup 10 ip igmp snooping filter mode Description The ip igmp snooping filter mode command is used to configure the Action mode for the desired port. Syntax ip igmp snooping filter mode mode 246