TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 278
ipv6 mld snooping vlan router-aging-time, ipv6 mld snooping vlan
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 278 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide ipv6 mld snooping vlan router-aging-time Description The ipv6 mld snooping vlan router-aging-time command is used to specify router port aging time for a specified VLAN. If this time is set to 0, then the global router port aging time will be used. The default time is 0. To restore the default timer, please use no ipv6 mld snooping vlan router-aging-time command. Syntax ipv6 mld snooping vlan vlan-id router-aging-time timer no ipv6 mld snooping vlan vlan-id router-aging-time Parameter vlan-id -- The specified IEEE 802.1Q VLAN ID, ranging from 1 to 4094. timer -- Aging time of the router port in seconds, ranging from 0 to 1000. Command Mode Global Configuration Mode Example Specify the router port aging time as 100 seconds in VLAN 2: T2500-28TC(config)# ipv6 mld snooping vlan 2 router-aging-time 100 ipv6 mld snooping vlan member-aging-time Description The ipv6 mld snooping vlan member-aging-time command is used to specify member port aging time for a specified VLAN. If this time is set to 0, then the global member port aging time will be used. The default time is 0. To restore the default timer, please use no ipv6 mld snooping vlan member-aging-time command. Syntax ipv6 mld snooping vlan vlan-id member-aging-time timer no ipv6 mld snooping vlan vlan-id member-aging-time Parameter vlan-id --The specified IEEE 802.1Q VLAN ID, ranging from 1 to 4094. timer -- Aging time of the member port in seconds, ranging from 200 to 1000 and 0. Command Mode Global Configuration Mode 261