TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 297

T2500-28TC JetStream L2 Managed Switch CLI Guide timeout -- The maximum time for the switch to wait for the response from the management station before resending a request, ranging from 1 to 3600 in seconds. Command Mode Global Configuration Mode Example Add a Notification entry, and configure the IP address of the management Host as 192.168.0.146, the UDP port as 162, the User name of the management station as admin, the Security Model of the management station as v2c, the type of the notifications as inform, the maximum time for the switch to wait as 1000 seconds, and the retries time as 100: T2500-28TC(config)#snmp-server host 192.168.0.146 162 admin smode v2c type inform retries 100 timeout 1000 snmp-server engineID Description The snmp-server engineID command is used to configure the local and remote engineID of the switch. To restore to the default setting, please use no snmp-server engineID command. Syntax snmp-server engineID { [local local-engineID] [remote remote-engineID] } no snmp-server engineID Parameter local - - Local Engine ID for local clients. The Engine ID is a unique alphanumeric string used to identify the SNMP engine on the switch. Its length ranges from 10 to 64 hexadecimal characters, which must be even number meanwhile. remote -- Remote Engine ID for the switch. The Engine ID is a unique alphanumeric string used to identify the SNMP engine on the remote device which receives informs from the switch. Its length ranges from 10 to 64 hexadecimal characters, which must be even number meanwhile. Command Mode Global Configuration Mode 280