TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 243
ethernet-oam link-monitor frame-period
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 243 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example For error frame event, configure the error threshold as 6 and the event detection interval as 9 seconds on Fast Ethernet port 3: T2500-28TC(config)# interface fastEthernet 1/0/3 T2500-28TC(config-if)# ethernet-oam link-monitor frame threshold 6 window 90 ethernet-oam link-monitor frame-period Description The ethernet-oam link-monitor frame-period command is used to configure the parameters about one of the link events, error frame period event. To return to the default configurations, please use no ethernet-oam link-monitor frame-period command. Syntax ethernet-oam link-monitor frame-period { [threshold threshold ] [ window window ] [notify { disable | enable } ] } no ethernet-oam link-monitor frame-period { threshold | window | notify } Parameter threshold -- Configure the error threshold for generating error frame period event. The range is from 1 to 4294967295 and the default value is 1. window -- Configure the error frame period event detection interval. The range is from 148810 to 89286000. The default value is 148810 for Fast Ethernet port and 1488100 for Gigabit Ethernet port. notify -- Enable/Disable the event notification. By default, it is enabled. threshold | window | notify -- The parameter that you want to return to the default configuration. 226