TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 204
show ddm configuration
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide value -- Enter the threshold value in mW. Default Setting None. Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Configure the high_alarm threshold of DDM Rx Power on the port 1/0/25 as 5: T2500-28TC(config)#interface gigabitEthernet 1/0/25 T2500-28TC(config-if)#ddm rx_power_threshold high_alarm 5 show ddm configuration Description The show ddm configuration command is used to display the DDM configuration. Syntax show ddm configuration { state | temperature | voltage | bias_current | tx_power | rx_power } Parameter state -- Display the DDM configuration state. temperature -- Displays the threshold of the DDM temperature value. voltage -- Displays the threshold of the DDM Voltage value. bias_current -- Displays the threshold of the DDM Bias Current value. tx_power -- Displays the threshold of the DDM Tx Power value. rx_power -- Displays the threshold of the DDM Rx Power value. Command Mode Privileged EXEC Mode and Any Configuration Mode Example View the DDM configuration state: T2500-28TC(config)#show ddm configuration state View the threshold of the DDM Voltage value: T2500-28TC(config)#show ddm configuration voltage 187