TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 241
ethernet-oam link-monitor symbol-period
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide Syntax ethernet-oam mode { passive | active } no ethernet-oam mode Parameter passive -- Specify the OAM mode as passive. active --Specify the OAM mode as active. Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Configure Ethernet OAM client to operate in passive mode for Fast Ethernet port 2: T2500-28TC(config)# interface fastEthernet 1/0/2 T2500-28TC(config-if)#ethernet-oam mode passive ethernet-oam link-monitor symbol-period Description The ethernet-oam link-monitor symbol-period command is used to configure the parameters about one of the link events, error symbol period event. To return to the default configurations, please use no ethernet-oam link-monitor symbol-period command. Syntax ethernet-oam link-monitor symbol-period { threshold threshold | window window | notify { disable | enable }} no ethernet-oam link-monitor symbol-period { threshold | window | notify } Parameter threshold -- Configure the error threshold for generating error symbol-period event. The range is from 1 to 4294967295 and the default value is 1. window -- Configure the error symbol-period event detection interval. The range is from 10 to 600, in terms of 100 ms intervals. The default value is 10. 224