TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 76
port-channel load-balance, lacp system-priority
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide port-channel load-balance Description The port-channel load-balance command is used to configure the Aggregate Arithmetic for LAG. To return to the default configurations, please use no port-channel load-balance command. Syntax port-channel load-balance {src-dst-mac | src-dst-ip} no port-channel load-balance Parameter src-dst-mac -- The source and destination MAC address. When this option is selected, the Aggregate Arithmetic will be based on the source and destination MAC addresses of the packets. The Aggregate Arithmetic for LAG is "src-dst-mac" by default. src-dst-ip -- The source and destination IP address. When this option is selected, the Aggregate Arithmetic will be based on the source and destination IP addresses of the packets. Command Mode Global Configuration Mode Example Configure the Aggregate Arithmetic for LAG as "src-dst-mac": T2500-28TC(config)#port-channel load-balance src-dst-mac lacp system-priority Description The lacp system-priority command is used to configure the LACP system priority globally. To return to the default configurations, please use no lacp system-priority command. Syntax lacp system-priority pri no lacp system-priority Parameter pri -- The system priority, ranging from 0 to 65535. It is 32768 by default. 59