TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 121
pppoe circuit-id type, Syntax, Command Mode, Example, Description, Parameter
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide Syntax pppoe circuit-id no pppoe circuit-id Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Enable the PPPoE Circuit-ID Insertion function for the Fast Ethernet port 1/0/1: T2500-28TC (config)# interface fastEthernet 1/0/1 T2500-28TC (config-if)# pppoe circuit-id pppoe circuit-id type Description The pppoe circuit-id type command is used to configure the type of PPPoE Circuit-ID for a specified port. By default, the PPPoE Circuit-ID type is "ip". Syntax pppoe circuit-id type { mac | ip | udf [UDF Value] } Parameter mac | ip | udf -- The type of PPPoE Circuit-ID for the port. mac: The MAC address of the switch will be used to encode the Circuit-ID option. ip: The IP address of the switch will be used to encode the Circuit-ID option. This is the default value. udf: A user specified string with the maximum length of 32 characters will be used to encode the Circuit-ID option. UDF Value -- The value of UDF. The maximum length is 32 characters. Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) 104