TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 304
rmon history
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 304 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide Note: The snmp-server traps vlan command without any parameter is used to enable the both traps. And the no snmp-server traps vlan command without any parameter is used to disable the the both traps. Syntax snmp-server traps vlan [ create | delete ] no snmp-server traps vlan [create | delete ] Parameter create -- Enable VLAN-created trap. It is sent when new VLAN is created successfully. delete -- Enable VLAN-deleted traps. It is sent when VLAN is deleted successfully. Command Mode Global Configuration Mode Example Enable all SNMP extended VLAN-related traps for the switch: T2500-28TC(config)# snmp-server traps vlan Enable VLAN-created trap only for the switch: T2500-28TC(config)# snmp-server traps vlan create rmon history Description The rmon history command is used to configure the history sample entry. To return to the default configuration, please use no rmon history command. RMON (Remote Monitoring), basing on SNMP architecture, functions to monitor the network. History Group is one of the commonly used RMON Groups. After a history group is configured, the switch collects network statistics information periodically, based on which the management station can monitor network effectively. Syntax rmon history index interface { fastEthernet port | gigabitEthernet port } [ interval seconds ] [ owner owner-name ] no rmon history index 287