TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 242
ethernet-oam link-monitor frame
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 242 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide notify -- Enable/Disable the event notification. By default, it is enabled. threshold | window | notify -- The parameter that you want to return to the default configuration. Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example For error symbol-period event, configure the error threshold as 5 and the event detection interval as 3 seconds on Fast Ethernet port 2: T2500-28TC(config)# interface fastEthernet 1/0/2 T2500-28TC(config-if)# ethernet-oam link-monitor symbol-period threshold 5 window 30 ethernet-oam link-monitor frame Description The ethernet-oam link-monitor frame command is used to configure the parameters about one of the link events, error frame event. To return to the default configurations, please use no ethernet-oam link-monitor frame command. Syntax ethernet-oam link-monitor frame { [threshold threshold ] [ window window ] [notify { disable | enable } ] } no ethernet-oam link-monitor frame { threshold | window | notify } Parameter threshold -- Configure the error threshold for generating error frame event. The range is from 1 to 4294967295 and the default value is 1. window -- Configure the error symbol-period event detection interval. The range is from 10 to 600, in terms of 100 ms intervals. The default value is 10. notify -- Enable/Disable the event notification. By default, it is enabled. threshold | window | notify -- The parameter that you want to return to the default configuration. 225