TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 219
access-list bind(interface), T2500-28TCconfig-if#access-list bind
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide qos-remark dscp dscp priority pri no qos-remark Parameter dscp -- DSCP of QoS Remark. Specify the DSCP region for the data packets matching the corresponding ACL. DSCP ranges from 0 to 63. By default, it is not limited. pri -- Local Priority of QoS Remark. Specify the local priority for the data packets matching the corresponding ACL. Local Priority ranges from 0 to 3. Command Mode Action Configuration Mode Example Edit the actions for policy1. For the data packets matching ACL 120, specify the DSCP region as 30 and local priority 2: T2500-28TC(config)#access-list policy action policy1 120 T2500-28TC(config-action)# qos-remark dscp 30 priority 2 access-list bind(interface) Description The access-list bind command is used to bind a policy to a specified port. To cancel the bind relation, please use no access-list bind command. Syntax access-list bind policy-name no access-list bind policy-name Parameter policy-name -- The name of the policy desired to bind. Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Bind policy1 to Fast Ethernet port 2: T2500-28TC(config)#interface fastEthernet 1/0/2 T2500-28TC(config-if)#access-list bind policy1 202