TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 319

T2500-28TC JetStream L2 Managed Switch CLI Guide Syntax lldp med-tlv-select { [inventory-management] [location] [network-policy] [power-management] [all] } no lldp med-tlv-select { [inventory-management] [location] [network-policy] [power-management] [all] } Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Exclude "network policy" and "inventory" TLVs in LLDPDU outgoing from port 1/0/2: T2500-28TC(config)# interface fastEthernet 1/0/2 T2500-28TC(config-if)# no lldp med-tlv-select network-policy inventorymanagement lldp med-location Description The lldp med-location command is used to configure the Location Identification TLV's content in outgoing LLDPDU of the port. Syntax lldp med-location { emergency-number identifier | civic-address [ [ language language ] [ province-state province-state ] [ county county] [city city ] [ street street ] [ house-number house-number ] [name name ] [ postal-zipcode postal-zipcode ] [ room-number room-number ] [ post-office-box post-office-box ] [ additional additional ] [ country-code country-code ] [ what { dhcp-server | endpoint | switch } ] ] } Parameter emergency-number -- Emergency Call Service ELIN identifier, which is used during emergency call setup to a traditional CAMA or ISDN trunk-based PSAP. The length of this field ranges from 10 to 25 characters. civic-address -- The civic address is defined to reuse the relevant sub-fields of the DHCP option for civic Address based Location Configuration Information as specified by IETF. 302