TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 203
ddm rx_power_threshold
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide low_warning -- Specify the lowest threshold for the warning. When the operating parameter falls below the value hereinafter, action associated with the warning will be taken. value -- Enter the threshold value in mW. Default Setting None. Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Configure the high_alarm threshold of DDM Tx Power on the port 1/0/25 as 5: T2500-28TC(config)#interface gigabitEthernet 1/0/25 T2500-28TC(config-if)#ddm tx_power_threshold high_alarm 5 ddm rx_power_threshold Description The ddm rx_power_threshold command is used to configure the threshold of the DDM Rx Power value. Syntax ddm rx_power_threshold { high_alarm | high_warning | low_alarm | low_warning } value Parameter high_alarm -- Specify the highest threshold for the alarm. When the operating parameter rises above the value hereinafter, action associated with the alarm will be taken. high_warning -- Specify the lowest threshold for the alarm. When the operating parameter falls below the value hereinafter, action associated with the alarm will be taken. low_alarm -- Specify the highest threshold for the warning. When the operating parameter rises above the value hereinafter, action associated with the warning will be taken. low_warning -- Specify the lowest threshold for the warning. When the operating parameter falls below the value hereinafter, action associated with the warning will be taken. 186