TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 170

T2500-28TC JetStream L2 Managed Switch CLI Guide Parameter port-list -- The list of Gigabit Ethernet ports. Command Mode Global Configuration Mode User Guidelines Command in the Interface Range gigabitEthernet Mode is executed independently on all ports in the range. It does not affect the execution on the other ports at all if the command results in an error on one port. Example To enter the Interface Range gigabitEthernet Configuration Mode, and configure Gigabit Ethernet ports 25, 26 and 28 at the same time by adding them to one port-list: T2500-28TC(config)# interface range gigabitEthernet 1/0/25-26,1/0/28 description Description The description command is used to add a description to the Ethernet port. To clear the description of the corresponding port, please use no description command. Syntax description string no description Parameter string -- Content of a port description, ranging from 1 to 16 characters. Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Add a description Port_5 to Fast Ethernet port 5: T2500-28TC(config)#interface fastEthernet 1/0/5 T2500-28TC(config-if)#description Port_5 153