TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 225

T2500-28TC JetStream L2 Managed Switch CLI Guide designated port, they can transit their states to forwarding rapidly to reduce the unnecessary forward delay. Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Enable the STP function of Fast Ethernet port 1, and configure the Port Priority as 64, ExtPath Cost as 100, IntPath Cost as 100, and then enable Edge Port: T2500-28TC(config)#interface fastEthernet 1/0/1 T2500-28TC(config-if)#spanning-tree common-config port-priority 64 ext-cost 100 int-cost 100 portfast enable point-to-point open spanning-tree mode Description The spanning-tree mode command is used to configure the STP mode of the switch. To return to the default configurations, please use no spanning-tree mode command. Syntax spanning-tree mode {stp | rstp | mstp} no spanning-tree mode Parameter stp -- Spanning Tree Protocol, the default value. rstp -- Rapid Spanning Tree Protocol mstp -- Multiple Spanning Tree Protocol Command Mode Global Configuration Mode Example Configure the spanning-tree mode as "mstp": T2500-28TC(config)#spanning-tree mode mstp 208