TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 324
cluster ntdp, Description, Syntax, Parameter, Command Mode
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 324 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide T2500-28TC(config)#cluster ndp T2500-28TC(config)#cluster ndp timer hello 50 aging 120 cluster ntdp Description The cluster ntdp command is used to configure NTDP globally. To return to the default configuration, please use no cluster ntdp command. NTDP (Neighbor Topology Discovery Protocol) is used to collect the NDP information and neighboring connection information of each device in a specific network range. It provides the commander switch with the information of devices which can join the cluster and collects topology information of devices within the specified hops. Syntax cluster ntdp cluster ntdp timer { [interval-time time] [hop-delay value] [port-delay value] } cluster ntdp hop hop-value no cluster ntdp no cluster ntdp timer { [interval-time time] [hop-delay value] [port-delay value] } no cluster ntdp hop hop-value Parameter time - - NTDP Interval Time, which is the interval to collect topology information. NTDP Interval Time ranges from 1 to 60 in minutes. By default, it is 1. hop-delay value -- NTDP Hop Delay, which is the time between the switch receiving NTDP request packets and the switch forwarding NTDP request packets for the first time. NTDP Hop Delay ranges from 1 to 1000 in milliseconds. By default, it is 200. port-delay value -- NTDP Port Delay, which is the time between the port forwarding NTDP request packets and its adjacent port forwarding NTDP request packets over. NTDP Port Delay ranges from 1 to 100 in milliseconds. By default, it is 20. hop-value -- NTDP Hops, which is the hop count the switch topology collects. NTDP Hops ranges from 1 to 16. By default, it is 3. Command Mode Global Configuration Mode 307