TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 280
ipv6 mld snooping vlan static, ipv6 mld snooping querier vlan
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 280 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide Command Mode Global Configuration Mode Example Configure the gigabitEthernet 1/0/2 as static router port in VLAN 2: T2500-28TC(config)# ipv6 mld snooping vlan 2 mrouter interface gigabitEthernet 1/0/2 ipv6 mld snooping vlan static Description The ipv6 mld snooping vlan static command is used to configure the static multicast groups. To disable the static multicast group, please use no ipv6 mld snooping vlan static command. Syntax ipv6 mld snooping vlan vlan-id static ipv6_multicast_addr interface gigabitEthernet port no ipv6 mld snooping vlan vlan-id static ipv6_multicast_addr [interface gigabitEthernet port] Parameter vlan-id -- The multicast group VLAN ID, ranging from 1 to 4094. ipv6_multicast_addr -- IPv6 address of the static multicast group. port -- Interface number of the member port(s). Command Mode Global Configuration Mode Example Configure the static multicast group ff80::1234 in VLAN 2 with the member port gigabitEthernet 1/0/2: T2500-28TC(config)# ipv6 mld snooping vlan 2 static ff80::1234 interface gigabitEthernet 1/0/2 ipv6 mld snooping querier vlan Description The ipv6 mld snooping querier vlan command is used to enable the MLD Querier function. To disable this function, please use no ipv6 mld snooping querier vlan command. 263