TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 127

T2500-28TC JetStream L2 Managed Switch CLI Guide clear logging Description The clear logging command is used to clear the information in the log buffer and log file. Syntax clear logging [ buffer | flash ] Parameter buffer | flash -The output channels: buffer and flash. Clear the information of the two channels, by default. Command Mode Global Configuration Mode Example Clear the information in the log file: T2500-28TC(config)#clear logging buffer logging host index Description The logging host index command is used to configure the Log Host. To clear the configuration of the specified Log Host, please use no logging host index command. Log Host is to receive the system log from other devices. You can remotely monitor the settings and operation status of other devices through the log host. Syntax logging host index idx host-ip level no logging host index idx Parameter idx --The index of the log host. The switch supports 4 log hosts. host-ip -- The IP for the log host. level --The severity level of the log information sent to each log host. There are 8 severity levels marked with values 0-7. The smaller value has the higher 110