TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 57
switchport dot1q-tunnel mapping, T2500-28TCconfig-if#switchport dot1q-tunnel mapping
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide switchport dot1q-tunnel mapping Description The switchport dot1q-tunnel mapping command is used to enable the VLAN Mapping feature for a specified port. To disable the VLAN Mapping feature of this port, please use the no switchport dot1q-tunnel mapping command. By default, the VLAN Mapping feature of all ports is disabled. Syntax switchport dot1q-tunnel mapping no switchport dot1q-tunnel mapping Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Enable the VLAN Mapping feature for the Fast Ethernet port 3: T2500-28TC(config)#interface fastEthernet 1/0/3 T2500-28TC(config-if)#switchport dot1q-tunnel mapping switchport dot1q-tunnel mode uplink Description The switchport dot1q-tunnel mode uplink command is used to configure a specified port as the VPN Up-link port. To cancel this VPN Up-link port, please use the no switchport dot1q-tunnel mode uplink command. By default, no port has been configured as the VPN Up-link port. Syntax switchport dot1q-tunnel mode uplink no switchport dot1q-tunnel mode uplink Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) 40