TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 34
T2500-28TC, Accessing Path, Prompt, Logout or Access the next mode, Global Configuration Mode
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide Mode Accessing Path Prompt Logout or Access the next mode Use the interface fastEthernet/gigabitEth Interface Configuration Mode ernet port or interface range fastEthernet/ gigabitEthernet port-list command to enter this mode from Global Configuration mode. T2500-28TC(config-if)# T2500-28TC(config-ifrange)# Use the end command or press Ctrl+Z to return to Privileged EXEC mode. Enter exit or # command to return to Global Configuration mode. A port number must be specified in the interface command. VLAN Configuration Mode Use the vlan vlan-list command to enter this mode from Global Configuration mode. T2500-28TC(configvlan)# Use the end command or press Ctrl+Z to return to Privileged EXEC mode. Enter the exit or # command to return to Global configuration mode. Note: 1. The user is automatically in User EXEC Mode after the connection between the PC and the switch is established by a console port or by a telnet connection. 2. Each command mode has its own set of specific commands. To configure some commands, you should access the corresponding command mode firstly. Global Configuration Mode: In this mode, global commands are provided, such as the Spanning Tree, Schedule Mode and so on. Interface Configuration Mode: In this mode, users can configure one or several ports. Different ports correspond to different commands a). Interface fastEthernet/gigabitEthernet: Configure parameters for a Fast/Gigabit Ethernet port, such as Duplex-mode, flow control status. b). Interface range fastEthernet/gigabitEthernet: Configure parameters for several Ethernet ports. c). Interface link-aggregation: Configure parameters for a link-aggregation, such as broadcast storm. d). Interface range link-aggregation: Configure parameters for multi-trunks. e). Interface vlan: Configure parameters for the vlan-port. Vlan Configuration Mode: In this mode, users can create a VLAN and add a specified port to the VLAN. 3. Some commands are global, that means they can be performed in all modes: show: Displays all information of switch, for example: statistic information, port information, VLAN information. 17