TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 84
line
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide Parameter minutes --The timeout time, ranging from 5 to 30 in minutes. The value is 10 by default. Command Mode Global Configuration Mode Example Configure the timeout time of the switch as 15 minutes: T2500-28TC(config)#user idle-timeout 15 line Description The line command is used to enter the Line Configuration Mode and make related configurations for the desired user(s), including the login mode and password configurations. Syntax line [console linenum | vty startlinenum endlinenum ] Parameter linenum -- The number of users allowed to login through console port. Its value is 0 in general as there is only one console port on a switch. startlinenum --The start serial number of the login user selected to configure the login mode and password, ranging from 0 to 15. 0 means the first login user number, 1 means the second, and the rest can be done on the same manner. endlinenum -- The end serial number of the login user selected to configure the login mode and password, ranging from 0 to 15. 0 means the first login user number, 1 means the second, and the rest can be done on the same manner. Command Mode Global Configuration Mode Example Enter the Console port configuration mode and configure the console port 0: T2500-28TC(config)#line console 0 67