TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 174
storm-control multicast, T2500-28TCconfig-if#storm-control broadcast
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide Parameter rate -- Specify the bandwidth for receiving broadcast packets on the port. The packet traffic exceeding the bandwidth will be discarded. By default, the value is "128K". Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Enable the broadcast control function for Fast Ethernet port 5: T2500-28TC(config)#interface fastEthernet 1/0/5 T2500-28TC(config-if)#storm-control broadcast storm-control multicast Description The storm-control multicast command is used to enable the multicast control function. To disable the multicast control function, please use no storm-control multicast command. Multicast control function allows the switch to filter multicast in the network. If the transmission rate of the multicast packets exceeds the set bandwidth, the packets will be automatically discarded to avoid network broadcast storm. Syntax storm-control multicast [rate rate] no storm-control multicast Parameter rate -- Select the bandwidth for receiving multicast packets on the port. The packet traffic exceeding the bandwidth will be discarded. By default, the value is "128K". Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Enable the multicast control function for Fast Ethernet port 5: T2500-28TC(config)#interface fastEthernet 1/0/5 157